Patching Oscillator Sync with Arturia Modular V

Patching Oscillator Sync with Arturia Modular V

I recently released a course on Lynda.com and LinkedIn Learning on how to use the Arturia Modular V software synth, which is modeled on the old Moog modular systems. In this movie I show how to create a typical oscillator sync patch. A couple of quick tips: In Arturia Modular V, sync is a function of each individual oscillator, rather than the oscillator driver; there is a switch for hard or weak sync (down = hard); and rather than patching the sync source as you would on a physical modular synth, in Modular V you click on an icon for a switch trigger input to bring up a menu to select which oscillator you wish to sync to.

Patching Pulse Width Modulation (PWM) with Arturia Modular V

Patching Pulse Width Modulation (PWM) with Arturia Modular V

I recently released a course on Lynda.com and LinkedIn Learning on how to use the Arturia Modular V software synth, which is modeled on the old Moog modular systems. Here I show how to create a typical PWM (pulse width modulation) patch, as well as describe some of the differences in using a Moog modular or the Modular V software compared to a typical Eurorack system.

Your First Modular Synthesizer Patch, Using Arturia Modular V

Your First Modular Synthesizer Patch, Using Arturia Modular V

Are you modular-curious? But are you a bit intimidated by the “some – okay, a lot of assembly required” nature of creating sounds from scratch on a modular synth? And do you prefer the safety of your computer screen over racks of gear with dangling patch cords and exposed power busses (at least while starting out)? For those who want to dip a toe into the modular waters without fear of it getting bit off by some unknown creature, I created a “your first patch” video as part of my Learning Modular Synthesis: Arturia Modular V course on Lynda.com.

Matching Octaves in Your Modular

Matching Octaves in Your Modular

Different oscillators and MIDI to CV converters may have varying ideas of what voltage a given note produces, and what pitch should you hear as a result. If there is a difference, in most cases it can be dialed out with a pitch knob or transpose switch. However, there are occasions when you need the assistance of an additional module to settle these disagreements.

NAMM 2016: Day 1

NAMM 2016: Day 1

I’m at the NAMM music show in Anaheim California, and thought I’d summarize some conversations and share some quick impressions of a few of the booths I visited on the first day of the show.